An LTE gateway with Linux that runs reliably in harsh environments. You can respond to failures remotely, and use up to four SIMs.
PoE support (up to 40 W)
- Connects up to four PoE cameras
- PoE current control
Built-in SSD
- 512 GB (up to 2 TB)
Reliable operation
- Multiple SIMs (SIM × 2, eSIM × 2*1)
- SIM (line) switching among the fastest in its class
- Protection against momentary power interruptions *2
- Remote automatic reboot of PoE and USB
- *1 An eSIM is a SIM embedded in the device itself.
- *2 Patented (Patent No. 6954423)
Showing all items.
| Product name | Edge Gateway (Indoor) amnimo G series | ||
|---|---|---|---|
| Model | AG10-010JP-10-□□□□ | AG10-010JP-10-□□□□ (supports regional BWA) | |
| CPU | ARM Cortex-A53 1 GHz (2 cores) | ||
| RAM *1 | 2G Byte | ||
| NOR FLASH | 4M Byte | ||
| NAND FLASH | 512M Byte | ||
| eMMC | 32G Byte | ||
| Storage (SSD) *2 | None, or 512 GB (standard) (contact us for 64 GB to 2 TB) | ||
| Mobile network | Network type | LTE Cat4, 3G | Supports regional BWA |
| Bands | LTE FDD: B1, B3, B8, B18, B19, B21 WCDMA: B1, B6, B8, B19 | LTE FDD: B1, B18 LTE TDD: B41 | |
| Antenna connectors | Mobile | SMA×2 | |
| GPS | SMA×1 | ||
| GNSS | GPS(QZSS) / GLONASS / Galileo / BeiDou | ||
| PoE power output | IEEE 802.3at (up to 40 W, 4 ports) | ||
| Interfaces | Ethernet | 10BASE-T/100BASE-TX/ 1000BASE-T × 5 ports (4 ports with PoE power output) RJ-45 connector | |
| RS-232 | D-sub 9-pin × 1 port (max. baud rate 500 kbps) | ||
| Console | RJ-45 × 1 port (Cisco console compatible) | ||
| USB | USB 2.0 Type-A × 1 port | ||
| SD card | 1 slot (SDXC) | ||
| SIM slots *3 | Micro SIM (3FF) × 2 slots, eSIM × 2 *2 | ||
| DI | Photocoupler, 4 ch (separate connector terminal required) | ||
| DO | PhotoMOS relay, 2 ch (separate connector terminal required) | ||
| Switches | PUSH | 1 (for shutdown and factory reset) | |
| DIP | 4 (for configuration) | ||
| LED | Two-color LEDs (PWR, ANT, MOB, ST1, ST2, ST3) | ||
| IP address management and name resolution | DHCP server DHCP client DHCP relay agent CIDR support DNS recursive server DNS server selection | ||
| IPv6 | Available as a standard Linux feature (configured with netplan) Client: link-local / static IP / RA / DHCPv6 RA/DHCPv6 server supported *Setup steps are in the developer’s manual (PDF, Japanese). | ||
| Routing | Static routing | ||
| Time synchronization | NTP server, NTP client | ||
| Interface functions | LAN secondary address, loopback interface | ||
| Network redundancy | Route switching by network monitoring and failover | ||
| Filtering | Stateful L3/L4 packet filter (input/output/forward) Matching on interface, address, protocol, port, TCP flags, and conntrack state Per-rule policy, logging, and default policy configurable | ||
| Security tools (separate installation required) | ClamAV (antivirus) Tripwire (host-based IDS) Snort (network-based IDS) *These tools are not installed by default. See the setup steps in the developer’s manual (PDF, Japanese). | ||
| Proxy server | Source restriction (network address/prefix or address range, up to 64 entries) Destination port restriction (separately for HTTP/HTTPS, port ranges allowed, up to 64 entries each) FQDN filtering (allowlist/blocklist, up to 64 entries) URL filtering (allowlist/blocklist, up to 64 entries) HTTP access control and authentication settings (Basic authentication, Digest authentication, validity period) Logging | ||
| NAT | Static NAT, dynamic NAT, destination NAT | ||
| Scheduling | Operation control by specified time and by device health monitoring | ||
| PPP/PPPoE | PPPoE client PPP authentication: PAP / CHAP | ||
| Mobile | Redundant connections | Up to 4 lines: SIM0/SIM1/eSIM × 2 Supports multi-profile SIMs | |
| Mobile module information | Module model number, firmware, IMEI | ||
| SIM information | ICCID, IMSI, MSISDN | ||
| Signal and connection status | RSSI, RSRP, RSRQ, SINR, RAT, CELL ID, BAND, EARFCN, TAC, MCC/MNC | ||
| VPN | IPsec | Key exchange protocol | IKEv1, IKEv2 |
| IPsec authentication method | Pre-shared key (PSK) | ||
| Encryption algorithms (IKE) | aes128, aes192, aes256, 3des | ||
| Authentication algorithms (IKE) | md5, sha1, sha256, sha384, sha512 | ||
| Authentication algorithms (PRF) | md5, sha1, sha256, sha384, sha512 | ||
| IKE mode (IKEv1 only) | Main mode / aggressive mode | ||
| DH Group | MODP768 / 1024 / 1536 / 2048 / 3072 / 4096 / 6144 / 8192 | ||
| Session keep (DPD) | clear/hold/restart | ||
| Keepalive (DPD timer) | Interval and timeout configurable | ||
| Lifetime (IKE SA) | Configurable | ||
| NAT traversal | Enabled | ||
| Verified concurrent connections | 8 | ||
| remot3.it, Inc. remote.it | Responder and initiator | ||
| L2TPv3 | L2TPv3 tunnels configurable (can be combined with IPsec) *Setup steps are in the developer’s manual (PDF, Japanese). | ||
| SSH/CLI | SSH server (port, TCP keepalive, and detailed cipher settings), CLI configuration interface | ||
| GUI | Dashboard (device information, system metrics, network traffic, mobile connection status, PoE device connection status, and more) | ||
| amnimo diagnostic information collection | |||
| Firmware update | |||
| Network diagnostics | |||
| amnimo settings | |||
| Network Optix Nx Witness Server | Centralized management of camera video (manage network cameras at multiple sites from one place) | ||
| Video recording | |||
| Video playback | |||
| Live video streaming | |||
| User permission management | |||
| Event notifications (on motion detection or other events) | |||
| Remote access | |||
| Camera settings management (add, remove, and reconfigure cameras) | |||
| Recording data management, multi-server configuration (multiple servers operated as one system) | |||
| Video search (by time or by event) | |||
| amnimo cloud application integration | Device Management System (a cloud service for remotely managing these devices deployed across many sites) | Remote configuration distribution (individual or bulk) | |
| Remote firmware updates (bulk) | |||
| Device health monitoring (online/offline) | |||
| Monitoring of connected external devices | |||
| Alarm notifications and alarm list | |||
| Remote device reset (reboot) | |||
| Device operation log collection | |||
| syslog collection | |||
| Device list and status management | |||
| Device management by site (grouping) | |||
| Configuration transfer on device replacement (config copy) | |||
| Health monitoring of downstream devices | |||
| Control over a persistent MQTT connection (always-on session) | |||
| Browser-based management UI | |||
| Filtered view of devices with alarms | |||
| Connection and communication status monitor | |||
| PoE operating information | |||
| Mobile signal status | |||
| Enhanced Video Management System (a cloud service that collects and sends only the video you need from this device, and manages surveillance cameras at multiple sites remotely) | Centralized management of cameras at multiple sites | ||
| Remote live viewing via the cloud | |||
| Retrieval of recorded video via the cloud | |||
| Automatic event video notifications | |||
| External alert system integration | |||
| Camera patrol | |||
| Remote access from PCs and smartphones | |||
| Optimized video transfer (only the video you need is sent to the cloud) | |||
| Nx Witness integration | |||
| Size (external dimensions) | 177 (W) × 110 (D) × 44 (H) mm (excluding protrusions) | ||
| Weight | Approx. 820 g | ||
| Power supply | Supply voltage | DC 10.8 V to 32 V | |
| Power consumption | Unit + PoE: max. 50 W (PoE: 40 W) | ||
| Absolute maximum ratings | 60W | ||
| Operating temperature | -20°C to 60°C | ||
| Storage temperature | -20°C to 70°C | ||
| Relative humidity | 10% to 90% (non-condensing) | ||
| Options | LTE antennas (rod antenna, external antenna), GPS antenna AC adapter (DC 24 V / 2 A), mounting bracket | ||
*1 About the difference between the catalog specification and usable memory: link (Japanese) *2 Select the storage (SSD) capacity at purchase.
*3 If you are considering eSIM, contact us.
Applies to version 3.4.0 and later.
https://jc-star.ipa.go.jp/conformance/CNF_019b34a2-42c2-7280-aeae-5694c6f97c78.html?lang=ja
Acceptance number: 0000000000000173
Conformity label registration number: 2026010100001491
Conformity label valid until: Jan 21, 2028
Product Images Product photos
Contact usProduct inquiries and documents
We can help you choose products and put together a package for your application. Consultations are free.