IoT Router Indoor
Compact Router with Wireless LAN (Indoor) AC15
A compact, high-performance LTE router built to industrial quality standards
JC-STAR: Obtained the ★1 (Level 1) conformity label. View the IPA listing
Offered in Japan. Specifications and certifications are for use in Japan.
SituationsUse cases
Use cases that feature this product. Each link opens the products for that use case.
FeaturesFeatures
The AC series does not support custom applications as standard. We may be able to support them depending on your needs, so contact us.
A compact, high-performance LTE router built to industrial quality standards
Part of the Compact Router series, built on a low-cost architecture. Built-in wireless LAN gives you more ways to connect equipment for IoT. A low-cost LTE device that runs reliably.

Compact Router with Wireless LAN (Indoor) amnimo C series
A 2-in-1 module makes this LTE router with wireless LAN small and low-cost
Router functions and peripheral interface control, which were conventionally implemented on a CPU separate from the communication module, now run on the communication module itself. One component does the work of two

Built-in wireless LAN for flexible network designs
- Supports both 2.4 GHz and 5 GHz bands
- Wireless LAN interface supporting 802.11 b/g/a/n/ac
- WPS: Supported (WPS button)
- Multiple SIM cards to guard against network failures
- Built-in LTE antenna for a compact installation
- When power is lost, the device notifies the cloud, so you can find stopped equipment early and isolate the cause
- Keeps running after external power is cut, with momentary power interruption protection
- Remote maintenance with the Device Management System
- Works on regional BWA (Broadband Wireless Access) and sXGP networks (with the AC15-061JP)
Reliable operation
- Multiple SIM cards to guard against network failures
- Keeps running after external power is cut, with momentary power interruption protection
- Remote maintenance with the Device Management System
- When power is lost, the device notifies the cloud, so you can find stopped equipment early and isolate the cause
Product ImagesProduct photos
SystemExample configurations
System configurations and integrations A compact, high-performance LTE router built to industrial quality standards Part of the … View example configurationsColumnsRelated articles
-
IoT routersHow IoT routers help with the challenges of monitoring EV charging stations
Jan 18, 2024 -
IoT routersWhy unlocked (SIM-free) LTE routers are drawing attention The basics of SIMs and LTE routers, explained
Mar 23, 2023 -
Edge gatewaysNetwork redundancy is the key to preparing for network outages How to achieve it with automatic switching between multiple SIMs
Mar 22, 2023 -
IoT routersWhat is a VPN? The basics explained
Mar 23, 2023
SpecificationsSpecifications
Showing all items.
A low-cost LTE device with wireless LAN for many kinds of IoT applications, built for reliable operation.
| Product name | Compact Router with Wireless LAN (Indoor) amnimo C series | ||
|---|---|---|---|
| Model | AC15-011JP-10 | AC15-061JP-10 | |
| CPU | ARM Cortex-A7 1.3GHz | ||
| DRAM | 256MB | ||
| Memory FLASH | 512M Byte | ||
| LAN 0 LAN 1 | 10BASE-T / 100BASE-TX | ||
| Interfaces | 2 ports | ||
| Connectors | RJ45 | ||
| Mobile network | LTE Cat4, 3G | ||
| Antennas | Internal antenna + SMA connector × 2 | ||
| Supported bands (LTE) | B1, B3, B8, B18, B19 ,B21 | B1,B3,B8,B18,B19,B26,B39,B41 | |
| Max. data rate (LTE) | Downlink 150 Mbps / uplink 50 Mbps | ||
| GNSS | GPS/GLONASS | ||
| Antenna connector | SMA connector (shared with LTE sub; cannot be used at the same time) | ||
| Wireless LAN | 802.11b/g/a/n/ac | ||
| Antennas | Internal antenna (1T × 1R) | ||
| Security types | Open system authentication (no encryption) | ||
| Open system authentication, 128-bit WEP | |||
| Open system authentication, 64-bit WEP | |||
| Shared key authentication, 128-bit WEP | |||
| Shared key authentication, 64-bit WEP | |||
| WPA-PSK (encryption: AES-CCMP) | |||
| WPA-PSK (encryption: mixed mode) | |||
| WPA-PSK (encryption: TKIP) | |||
| WPA-PSK/WPA2-PSK authentication, mixed mode (encryption: AES-CCMP) | |||
| WPA-PSK/WPA2-PSK authentication, mixed mode (encryption: TKIP) | |||
| WPA-PSK/WPA2-PSK authentication, mixed mode (encryption: mixed mode) | |||
| WPA2-PSK (encryption: AES-CCMP) | |||
| wpa2-psk-mixed WPA2-PSK (encryption: mixed mode) | |||
| wpa2-psk-tkip WPA2-PSK (encryption: TKIP) | |||
| WPA2-PSK/WPA3-SAE authentication, mixed mode (encryption: AES-CCMP) | |||
| WPA2-PSK/WPA3-SAE authentication, mixed mode (encryption: mixed mode) | |||
| WPA3-SAE authentication (encryption: AES-CCMP) | |||
| Security functions | SSID stealth / privacy separator / MAC address filtering | ||
| Frequency bands | 2.4 GHz (ch 1 to 13), 5 GHz (W52, W53, W56) (switchable) | ||
| Operating mode | Access point / station | ||
| Max. connected devices (recommended max. in operation) | 10 (8) | ||
| WPS | WPS button | ||
| IP address management and name resolution | DHCP server, DHCP client, DHCP relay agent, CIDR support, DNS recursive server, DNS server selection | ||
| Routing | Static routing | ||
| Time synchronization | NTP server, NTP client | ||
| Interface functions | LAN secondary address, loopback interface | ||
| Network redundancy | Route switching by network monitoring and failover | ||
| Filtering | Stateful L3/L4 packet filter (input/output/forward); matching on interface, address, protocol, port, TCP flags, and conntrack state; per-rule policy, logging, and default policy configurable | ||
| NAT | Static NAT, dynamic NAT, destination NAT | ||
| Scheduling | Operation control by specified time and by device health monitoring | ||
| PPP/PPPoE | PPPoE client PPPoE server (transparent mode supported) *AC10 only PPP authentication: PAP / CHAP | ||
| Mobile | Redundant connections | Up to 4 lines: SIM0/SIM1/eSIM × 2 Supports multi-profile SIMs | |
| Mobile module information | Module model number, firmware, IMEI | ||
| SIM information | ICCID, IMSI, MSISDN | ||
| Signal and connection status | RSSI, RSRP, RSRQ, SINR, RAT, CELL ID, BAND, EARFCN, TAC, MCC/MNC | ||
| VPN | IPsec | Key exchange protocol | IKEv1, IKEv2 |
| IPsec authentication method | Pre-shared key (PSK) | ||
| Encryption algorithms (IKE) | aes128, aes192, aes256, 3des | ||
| Authentication algorithms (IKE) | md5, sha1, sha256, sha384, sha512 | ||
| Authentication algorithms (PRF) | md5, sha1, sha256, sha384, sha512 | ||
| IKE mode (IKEv1 only) | Main mode / aggressive mode | ||
| DH Group | MODP768 / 1024 / 1536 / 2048 / 3072 / 4096 / 6144 / 8192 | ||
| Session keep (DPD) | clear/hold/restart | ||
| Keepalive (DPD timer) | Interval and timeout configurable | ||
| Lifetime (IKE SA) | Configurable | ||
| NAT traversal | Enabled | ||
| Verified concurrent connections | 8 | ||
| remote.it (preinstalled) | Responder | ||
| GUI | Dashboard (device information, system metrics, network traffic, mobile connection status, PoE device connection status, and more) | ||
| amnimo diagnostic information collection | |||
| Firmware update | |||
| Network diagnostics | |||
| amnimo settings | |||
| amnimo DMS | Remote configuration distribution (individual or bulk) | ||
| Remote firmware updates (bulk) | |||
| Device health monitoring (online/offline) | |||
| Monitoring of connected external devices | |||
| Alarm notifications and alarm list | |||
| Remote device reset (reboot) | |||
| Remote reset of PoE devices (port power on/off) *AC25 only | |||
| Device operation log collection | |||
| syslog collection | |||
| Device list and status management | |||
| Device management by site (grouping) | |||
| Configuration transfer on device replacement (config copy) | |||
| Control over a persistent MQTT connection (always-on session) | |||
| Browser-based management UI | |||
| Filtered view of devices with alarms | |||
| Connection and communication status monitor | |||
| PoE operating information | |||
| Mobile signal status | |||
| Size (external dimensions) | 145 × 82.5 × 28 mm (excluding protrusions) | ||
| Weight | Approx. 200 g | ||
| Input voltage | DC+5.0 ~ +28.0V | ||
| AC adapter specifications | Input AC 100 V / frequency 50 Hz / 60 Hz | ||
| Operating temperature | -20°C to 60°C | ||
| Operating humidity | 10% to 90% (non-condensing) | ||
| Power consumption | Unit: max. 6.5 W | ||
As of October 2025. Specifications are subject to change without notice.

JC-STAR: Obtained the JC-STAR ★1 (Level 1) conformity label
Conformity label number: 2025100100001000
Product information page for the conformity label: View the IPA listing
DownloadDownloads
Specifications, manuals, and videos
Before You StartCommon questions before purchase(We answer individually)
How much data does it use?
Contact us with the products you use and your configuration (devices you connect, data you send, and so on).
How are costs broken down?
Tell us your device, cloud, and network configuration, and request a quote.
What should I check first when there is a problem?
Search the FAQ (Japanese) for your symptoms. If that does not solve the problem, send a request through the form on our support site (Japanese).
How is security handled?
This product has obtained the JC-STAR Level 1 conformity label. See the Product security page for details, along with vulnerability handling and software updates.
Contact usProduct inquiries and documents
We can help you choose products and put together a package for your application. Consultations are free.


