Showing all items.
| Product name | Compact Router amnimo C series | ||
|---|---|---|---|
| Model | AC10-011JP-10 | ||
| CPU | ARM Cortex-A7 1.3 GHz (2 cores) | ||
| RAM | 256MB | ||
| NAND FLASH | 512MB | ||
| Mobile network* | LTE Cat4, 3G | ||
| Bands | LTE FDD: B1, B3, B8, B18, B19, B21 WCDMA: B1, B6, B8, B19 | ||
| Antenna connectors | When no external antenna is connected, the internal antenna is used. | ||
| Mobile | SMA×2 | ||
| Interfaces | |||
| Ethernet | 10BASE-T/100BASE-TX × 1 port, RJ-45 connector | ||
| Console | USB Type-C × 1 port | ||
| SIM slots | Micro SIM (3FF) × 2 slots, eSIM × 2 *1 | ||
| Switches | |||
| Push | 1 (for shutdown and factory reset) | ||
| LED | Two-color LEDs (PWR, ANT, MOB) | ||
| IP address management and name resolution | DHCP server, DHCP client, DHCP relay agent, CIDR support, DNS recursive server, DNS server selection | ||
| Routing | Static routing | ||
| Time synchronization | NTP server, NTP client | ||
| Interface functions | LAN secondary address, loopback interface | ||
| Network redundancy | Route switching by network monitoring and failover | ||
| Filtering | Stateful L3/L4 packet filter (input/output/forward); matching on interface, address, protocol, port, TCP flags, and conntrack state; per-rule policy, logging, and default policy configurable | ||
| Proxy server | Source restriction (network address/prefix or address range, up to 64 entries), destination port restriction (separately for HTTP/HTTPS, port ranges allowed, up to 64 entries each), FQDN filtering (allowlist/blocklist, up to 64 entries), URL filtering (allowlist/blocklist, up to 64 entries), HTTP access control and authentication settings (Basic authentication, Digest authentication, validity period), logging | ||
| NAT | Static NAT, dynamic NAT, destination NAT | ||
| Scheduling | Operation control by specified time and by device health monitoring | ||
| PPP/PPPoE | PPPoE client PPPoE server (transparent mode supported) *AC10 only PPP authentication: PAP / CHAP | ||
| Mobile | Line redundancy | Up to 4 lines: SIM0/SIM1/eSIM × 2 Supports multi-profile SIMs | |
| Mobile module information | Module model number, firmware, IMEI | ||
| SIM information | ICCID, IMSI, MSISDN | ||
| Signal and connection status | RSSI, RSRP, RSRQ, SINR, RAT, CELL ID, BAND, EARFCN, TAC, MCC/MNC | ||
| VPN | IPsec | Key exchange protocol | IKEv1, IKEv2 |
| IPsec authentication method | Pre-shared key (PSK) | ||
| Encryption algorithms (IKE) | aes128, aes192, aes256, 3des | ||
| Authentication algorithms (IKE) | md5, sha1, sha256, sha384, sha512 | ||
| Authentication algorithms (PRF) | md5, sha1, sha256, sha384, sha512 | ||
| IKE mode (IKEv1 only) | Main mode / aggressive mode | ||
| DH Group | MODP768 / 1024 / 1536 / 2048 / 3072 / 4096 / 6144 / 8192 | ||
| Session keep (DPD) | clear/hold/restart | ||
| Keepalive (DPD timer) | Interval and timeout configurable | ||
| Lifetime (IKE SA) | Configurable | ||
| NAT traversal | Enabled | ||
| Verified concurrent connections | 8 | ||
| remote.it (preinstalled) | Responder | ||
| SSH/telnet/CLI | SSH server (port, TCP keepalive, and detailed cipher settings), telnet server (port setting), CLI configuration interface | ||
| GUI | Dashboard (device information, system metrics, network traffic, mobile connection status, and more) | ||
| amnimo diagnostic information collection | |||
| Firmware update | |||
| Network diagnostics | |||
| amnimo settings | |||
| amnimo DMS | Remote configuration distribution (individual or bulk) | ||
| Remote firmware updates (bulk) | |||
| Device health monitoring (online/offline) | |||
| Monitoring of connected external devices | |||
| Alarm notifications and alarm list | |||
| Remote device reset (reboot) | |||
| Device operation log collection | |||
| syslog collection | |||
| Device list and status management | |||
| Device management by site (grouping) | |||
| Configuration transfer on device replacement (config copy) | |||
| Control over a persistent MQTT connection (always-on session) | |||
| Browser-based management UI | |||
| Filtered view of devices with alarms | |||
| Connection and communication status monitor | |||
| PoE operating information | |||
| Mobile signal status | |||
| External dimensions | 126 (W) × 66 (D) × 28 (H) mm (excluding protrusions) | ||
| Weight | Approx. 120 g | ||
| Power supply | DC 5.0 V to 28.0 V | ||
| Power consumption | Unit: max. 5.5 W | ||
| Operating temperature | -20°C to 60°C | ||
| Storage temperature | -20°C to 70°C | ||
| Relative humidity | 10% to 90% (non-condensing) | ||
*1 Supported bands depend on the communication module installed.
*2 If you are considering eSIM, contact us.
JC-STAR: Obtained the JC-STAR ★1 (Level 1) conformity label
Conformity label number: 2025100100001000
Product information page for the conformity label: View the IPA listing
Product Images Product photos
Contact usProduct inquiries and documents
We can help you choose products and put together a package for your application. Consultations are free.