IoT Router Indoor
Compact Router with Wireless LAN (Indoor) AC15Specifications
A low-cost LTE device with wireless LAN for many kinds of IoT applications, built for reliable operation.
Showing all items.
| Product name | Compact Router with Wireless LAN (Indoor) amnimo C series | ||
|---|---|---|---|
| Model | AC15-011JP-10 | AC15-061JP-10 | |
| CPU | ARM Cortex-A7 1.3GHz | ||
| DRAM | 256MB | ||
| Memory FLASH | 512M Byte | ||
| LAN 0 LAN 1 | 10BASE-T / 100BASE-TX | ||
| Interfaces | 2 ports | ||
| Connectors | RJ45 | ||
| Mobile network | LTE Cat4, 3G | ||
| Antennas | Internal antenna + SMA connector × 2 | ||
| Supported bands (LTE) | B1, B3, B8, B18, B19 ,B21 | B1,B3,B8,B18,B19,B26,B39,B41 | |
| Max. data rate (LTE) | Downlink 150 Mbps / uplink 50 Mbps | ||
| GNSS | GPS/GLONASS | ||
| Antenna connector | SMA connector (shared with LTE sub; cannot be used at the same time) | ||
| Wireless LAN | 802.11b/g/a/n/ac | ||
| Antennas | Internal antenna (1T × 1R) | ||
| Security types | Open system authentication (no encryption) | ||
| Open system authentication, 128-bit WEP | |||
| Open system authentication, 64-bit WEP | |||
| Shared key authentication, 128-bit WEP | |||
| Shared key authentication, 64-bit WEP | |||
| WPA-PSK (encryption: AES-CCMP) | |||
| WPA-PSK (encryption: mixed mode) | |||
| WPA-PSK (encryption: TKIP) | |||
| WPA-PSK/WPA2-PSK authentication, mixed mode (encryption: AES-CCMP) | |||
| WPA-PSK/WPA2-PSK authentication, mixed mode (encryption: TKIP) | |||
| WPA-PSK/WPA2-PSK authentication, mixed mode (encryption: mixed mode) | |||
| WPA2-PSK (encryption: AES-CCMP) | |||
| wpa2-psk-mixed WPA2-PSK (encryption: mixed mode) | |||
| wpa2-psk-tkip WPA2-PSK (encryption: TKIP) | |||
| WPA2-PSK/WPA3-SAE authentication, mixed mode (encryption: AES-CCMP) | |||
| WPA2-PSK/WPA3-SAE authentication, mixed mode (encryption: mixed mode) | |||
| WPA3-SAE authentication (encryption: AES-CCMP) | |||
| Security functions | SSID stealth / privacy separator / MAC address filtering | ||
| Frequency bands | 2.4 GHz (ch 1 to 13), 5 GHz (W52, W53, W56) (switchable) | ||
| Operating mode | Access point / station | ||
| Max. connected devices (recommended max. in operation) | 10 (8) | ||
| WPS | WPS button | ||
| IP address management and name resolution | DHCP server, DHCP client, DHCP relay agent, CIDR support, DNS recursive server, DNS server selection | ||
| Routing | Static routing | ||
| Time synchronization | NTP server, NTP client | ||
| Interface functions | LAN secondary address, loopback interface | ||
| Network redundancy | Route switching by network monitoring and failover | ||
| Filtering | Stateful L3/L4 packet filter (input/output/forward); matching on interface, address, protocol, port, TCP flags, and conntrack state; per-rule policy, logging, and default policy configurable | ||
| NAT | Static NAT, dynamic NAT, destination NAT | ||
| Scheduling | Operation control by specified time and by device health monitoring | ||
| PPP/PPPoE | PPPoE client PPPoE server (transparent mode supported) *AC10 only PPP authentication: PAP / CHAP | ||
| Mobile | Redundant connections | Up to 4 lines: SIM0/SIM1/eSIM × 2 Supports multi-profile SIMs | |
| Mobile module information | Module model number, firmware, IMEI | ||
| SIM information | ICCID, IMSI, MSISDN | ||
| Signal and connection status | RSSI, RSRP, RSRQ, SINR, RAT, CELL ID, BAND, EARFCN, TAC, MCC/MNC | ||
| VPN | IPsec | Key exchange protocol | IKEv1, IKEv2 |
| IPsec authentication method | Pre-shared key (PSK) | ||
| Encryption algorithms (IKE) | aes128, aes192, aes256, 3des | ||
| Authentication algorithms (IKE) | md5, sha1, sha256, sha384, sha512 | ||
| Authentication algorithms (PRF) | md5, sha1, sha256, sha384, sha512 | ||
| IKE mode (IKEv1 only) | Main mode / aggressive mode | ||
| DH Group | MODP768 / 1024 / 1536 / 2048 / 3072 / 4096 / 6144 / 8192 | ||
| Session keep (DPD) | clear/hold/restart | ||
| Keepalive (DPD timer) | Interval and timeout configurable | ||
| Lifetime (IKE SA) | Configurable | ||
| NAT traversal | Enabled | ||
| Verified concurrent connections | 8 | ||
| remote.it (preinstalled) | Responder | ||
| GUI | Dashboard (device information, system metrics, network traffic, mobile connection status, PoE device connection status, and more) | ||
| amnimo diagnostic information collection | |||
| Firmware update | |||
| Network diagnostics | |||
| amnimo settings | |||
| amnimo DMS | Remote configuration distribution (individual or bulk) | ||
| Remote firmware updates (bulk) | |||
| Device health monitoring (online/offline) | |||
| Monitoring of connected external devices | |||
| Alarm notifications and alarm list | |||
| Remote device reset (reboot) | |||
| Remote reset of PoE devices (port power on/off) *AC25 only | |||
| Device operation log collection | |||
| syslog collection | |||
| Device list and status management | |||
| Device management by site (grouping) | |||
| Configuration transfer on device replacement (config copy) | |||
| Control over a persistent MQTT connection (always-on session) | |||
| Browser-based management UI | |||
| Filtered view of devices with alarms | |||
| Connection and communication status monitor | |||
| PoE operating information | |||
| Mobile signal status | |||
| Size (external dimensions) | 145 × 82.5 × 28 mm (excluding protrusions) | ||
| Weight | Approx. 200 g | ||
| Input voltage | DC+5.0 ~ +28.0V | ||
| AC adapter specifications | Input AC 100 V / frequency 50 Hz / 60 Hz | ||
| Operating temperature | -20°C to 60°C | ||
| Operating humidity | 10% to 90% (non-condensing) | ||
| Power consumption | Unit: max. 6.5 W | ||
As of October 2025. Specifications are subject to change without notice.
JC-STAR: Obtained the JC-STAR ★1 (Level 1) conformity label
Conformity label number: 2025100100001000
Product information page for the conformity label: View the IPA listing
Product Images Product photos
Contact usProduct inquiries and documents
We can help you choose products and put together a package for your application. Consultations are free.